• Home
  • Cisco Compatible US Clip Power Adapter Cube for SPA300 SPA500 Series (PA100-NA-CLIP) | New
Cisco Compatible US Clip Power Adapter Cube for SPA300 SPA500 Series (PA100-NA-CLIP) | New

Cisco Compatible US Clip Power Adapter Cube for SPA300 SPA500 Series (PA100-NA-CLIP) | New

SKU: PA100-NA-CLIP-GEN
1Review

Same Day Shipping - Arrives in 3-5 Business Days
30-day Returns

$10.99 $10.99
For immediate assistance call our support team at 973-808-4588. For additional information, send an email to website@telquestintl.com.

Overview

Cisco Linksys PA100-NA Power Clip North American Outlet - PA-100-NA Power Supply / Adapter Connector



The Cisco Linksys PA100-NA Power Clip North American Outlet - PA100-NA Power Supply / Adapter Connector (power supply not included) (PA100-NA-CLIP) is an adapter clip that attaches to the Cisco / Linksys PA100-NA power supply and allows you to use the device in a variety of countries. Simply remove the current power adapter from your PA100 and slide the NA clip onto your PA100 to use it in these areas. With these clips, you can convert any PA100 power supply into a PA100-NA.


Features

  • Cisco / Linksys PA100 Power Supply Clip - North American Outlet For power outlets in USA, Canada, Japan, Mexico, Brazil and others Is compatible with the Cisco PA-100 (Linksys PA-100) power supply

Specifications

Cisco Linksys PA100-NA Power Clip North American Outlet - PA-100-NA Power Supply / Adapter Connector


Manufacturer

  • Generic

Manufacturer Part Number

  • PA100-NA-CLIP

Product Name

  • Cisco Linksys PA100-NA Power Clip North American Outlet - PA-100-NA Power Supply / Adapter Connector (power supply not included) (PA100-NA-CLIP)

Product Type

  • Power Clip

Countries Used

  • American Samoa, Anguilla, Antigua, Aruba, Bahamas, Bangladesh, Barbados, Bermuda, Bolivia, Brazil, Cambodia, Canada, Cayman Islands, China (without holes in blades and slightly shorter blades), Colombia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Laos, Lebanon, Liberia, Maldives, Mexico, Micronesia, Montserrat, Netherlands Antilles, Nicaragua, Niger, Okinawa, Panama, Peru, Philippines, Puerto Rico, St. Vincent, Saudi Arabia, Tahiti, Taiwan, Thailand, United States, Venezuela, Vietnam, Virgin Islands (U.S.& British), Yemen

Frequently Asked Questions

Cisco Compatible US Clip Power Adapter Cube for SPA300 SPA500 Series (PA100-NA-CLIP)
Frequently Asked Questions (FAQ's)



What devices are compatible with the Cisco PA100-NA-CLIP power supply?
  • It is compatible with the Cisco SPA500, CP500, and SPA9xx series devices.
  • What is the output voltage and current of the PA100-NA-CLIP?
  • The output is 5V DC at 2A.
  • Can I use this power supply with non-Cisco devices?
  • It is not recommended because it was created exclusively for Cisco VoIP devices
  • Is the PA100-NA-CLIP suitable for international use?
  • The NA version is intended for North American use. For other regions, apply the relevant model.
  • What is the input voltage range for the PA100-NA-CLIP?
  • It accepts 100-240V AC, 50/60Hz input.
  • What type of plug does the PA100-NA-CLIP use?
  • It uses a North American (Type B) plug.
  • What are the dimensions of the PA100-NA-CLIP?
  • Approximately 7.6cm x 5.7cm x 2.9cm.
  • How much does the PA100-NA-CLIP weigh?
  • It weighs approximately 150g.
  • How do I install the PA100-NA-CLIP?
  • Simply put it into a power socket and connect it to a compatible Cisco device.
  • Does the PA100-NA-CLIP require any special configuration?
  • No, it is a plug-and-play gadget that does not require configuration.
  • Is the PA100-NA-CLIP energy efficient?
  • Yes, it is intended for great efficiency and minimal power consumption.
  • How reliable is the PA100-NA-CLIP?
  • It is designed to offer consistent and stable power output for Cisco VoIP equipment.
  • What should I do if my PA100-NA-CLIP isn't powering my device?
  • Check all connections, make sure the outlet works, and confirm device compatibility.
  • How often should I replace my PA100-NA-CLIP?
  • Replace it if you discover any damage or if it no longer functions properly. There is no predetermined replacement timetable.
  • Can I use this power supply with non-VoIP Cisco devices?
  • It's primarily designed for Cisco VoIP devices. For other Cisco products, check their specific power requirements.
  • Where can I purchase a PA100-NA-CLIP?
  • It's available via authorized Cisco resellers and select online stores.
  • Can I use this power supply with Cisco 300 Series or 100 Series devices?
  • Yes, it is compatible with the Cisco 500 Series, 300 Series, 100 Series, and many other Cisco VoIP phones.
  • Does the PA100-NA-CLIP come with interchangeable plugs?
  • No, the NA version is intended for North American markets. Other regions have different models available.
  • Is the PA100-NA-CLIP suitable for continuous use?
  • Yes, it is designed to provide consistent and dependable power output for sustained usage with compatible Cisco equipment.
  • Is the PA100-NA-CLIP part of Cisco's Small Business Voice Accessories?
  • Yes, it's one of the Cisco Small Business Voice Accessories.
  • Ratings & Reviews

    1 review

    • 4 stars
    • 0 reviews
    • 3 stars
    • 0 reviews
    • 2 stars
    • 0 reviews
    • 1 star
    • 0 reviews

    Great Buy

    by

    convenient for travel and on-the-go use. :)