Key Features
16 x 10/100/1000 Mbps Gigabit Ethernet ports.
8 x PoE-enabled Gigabit ports for powering network devices.
64W total PoE budget for phones, access points and cameras.
32 Gbps switching capacity for fast, nonblocking traffic flow.
14.88 Mpps forwarding rate for efficient packet handling.
8K MAC address table for small to mid-size business networks.
Jumbo frame support up to 9216 bytes.
QoS support with automatic prioritization for voice and video.
Loop detection and cable diagnostics for easier troubleshooting.
Fanless, unmanaged, and plug-and-play design.
Rack-mountable form factor with internal power supply.
Support for Energy Efficient Ethernet IEEE 802.3az.
Benefits
- Simplify deployment with an unmanaged switch that works right out of the box.
- Reduce cabling clutter by powering compatible devices directly through PoE.
- Keep voice and video traffic running smoothly with built-in QoS.
- Improve reliability and reduce downtime using automatic loop detection and cable diagnostics.
- Fit cleanly into office environments with a quiet fanless design and rack-mountable chassis.
- Lower operating costs with energy-efficient Ethernet and straightforward management-free operation.
| Manufacturer | Cisco |
|---|---|
| Manufacturer Part Number | CBS110-16PP-EU-RF |
| Product Name | Cisco CBS110-16PP 16-Port Gigabit Unmanaged Networking Switch |
| Product Type | Networking Switch |
| Product Family | Cisco Business 110 Series Unmanaged Switch |
| Ports | 16 x 10/100/1000 Mbps RJ-45 Gigabit Ethernet ports |
| PoE Ports | 8 x PoE-enabled ports |
| PoE Standard | IEEE 802.3af PoE |
| PoE Budget | 64 W |
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| MAC Address Table | 8K entries |
| Packet Buffer | 2 Mbit |
| Flash Memory | 16 MB |
| Processor | 400 MHz ARM |
| System Memory | 128 MB |
| Jumbo Frames | Up to 9216 bytes |
| QoS | Yes, 802.1p priority, WRR, priority queuing |
| VLAN Support | Yes |
| IGMP Snooping | Yes |
| Loop Detection | Yes |
| Cable Diagnostics | Yes |
| Flow Control | Yes |
| Auto MDI/MDI-X | Yes |
| Energy Efficient Ethernet | IEEE 802.3az supported |
| Management | Unmanaged / plug-and-play |
| SNMP | No |
| IPv6 Compatible | No |
| Uplink Ports | None |
| Enclosure / Mounting | Rack-mountable, desktop, and wall-mountable depending on kit/region |
| Power Supply | Internal power supply |
| Voltage Required | AC 120/230 V, 50/60 Hz |
| Power Consumption | 80.38 W operational max |
| Dimensions | 279 x 170 x 44 mm |
| Weight | 1.3 kg |
| Operating Temperature | 0 C to 40 C |
| Storage Temperature | -20 C to 70 C |
| Operating Humidity | 10% to 90% non-condensing |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1p, 802.3af, 802.3az |
| Typical Use | Small business networks, IP phones, access points, cameras |
Frequently Asked Questions
Cisco CBS110-16PP 16-port Gigabit Unmanaged Networking Switch (EU) | Refresh
How many Ethernet ports does the Cisco CBS110-16PP have?
Does the Cisco CBS110-16PP support Power over Ethernet (PoE+)?
What devices can be powered by the PoE+ ports?
Is the Cisco CBS110-16PP a managed switch?
Does the switch require software installation?
Does the switch support Gigabit Ethernet?
Is the switch suitable for small businesses?
Does the switch automatically detect connected devices?
What is Auto MDI/MDIX?
Does the switch support Quality of Service (QoS)?
Is the Cisco CBS110-16PP fanless?
Can I mount the switch in a network rack?
Does the switch support Energy Efficient Ethernet?
Is the switch compatible with IP surveillance systems?
Can I use the switch with wireless access points?
Does the switch require ongoing maintenance?
Is the Cisco CBS110-16PP suitable for expanding an existing network?
Can the switch be used in retail, education, and healthcare environments?
Is the CBS110-16PP a genuine Cisco product?
Why choose the Cisco CBS110-16PP 16-Port Gigabit Unmanaged Networking Switch?
Cisco CBS110-16PP 16-port Gigabit Unmanaged Networking Switch (EU) | Refresh
Cisco
