Overview
Valcom VP-6124 24v/DC 6A Power Supply
Product Overview
The VP-6124 is a fully regulated 24VDC, 6 Amp switching power supplies. The primary is protected by a 4 Amp slo-blow fuse and the 2 Amp outputs by auto resetting fuses. The outputs are floating with respect to ground. The regulator will maintain 24 Volts +/-2% over the rated range of input voltages and output loads. A greater than 6 Amp load on power up will cause the power supply to current limit. Short circuit protection is provided. Over voltage is provided to limit the output voltage to approximately 28 Volts should a failure occur within the power supply. Outputs may be paralleled but not series connected.
Features
- The VP-6124 is designed to be used with:
- All Valcom page control units
- Valcom one-way amplified speaker assemblies
- Any application where 24VDC filtered talk battery is required
Specifications
Weight: 5.0 lbs. (2.27 Kg)
Dimensions: 10.30"H x 5.92"W x 2.50"D
(26.16cm H x 15.04cm W x 6.35cm D)
Input:
Voltage: 115VAC
Frequency: 60Hz
Full Load Line Current: 3 Amps
Rated Power: 180 Watts
Output:
Rated Power: 144 Watts
Voltage: 24 Volts
Current: 6 Amps (3 - 2 Amp outputs)
Fusing: 3 - 2 Amps, auto-reset polyswitch fuses
Ripple and Noise: 1% P-P maximum
Operating Temperature: 0 to +40 C
Storage Temperature: -40 to +85 C
Cooling: Free Air Convection
Humidity: 10 to 90% (non-condensing)
Shock: 10G